Supermicro CSE-733T-450-B Instrukcja Użytkownika Pobierz pdf (Strona 11)

2-1

Chapter 2: System Safety

Chapter 2

System Safety

2-1 Overview

This chapter provides a quick setup checklist to get your chassis up and running.

Following the steps in order given should enable you to have your chassis setup and

operational within a minimal amount of time. This quick set up assumes that you are

an experienced technician, famailiar with common concepts and terminology.

2-2 Warnings and Precautions

You should inspect the box the chassis was shipped in and note if it was damaged

in any way. If the chassis itself shows damage, le a damage claim with carrier

who delivered your system.

Decide on a suitable location for the rack unit that will hold that chassis. It should

be situated in a clean, dust-free area that is well venilated. Avoid areas where heat,

electrical noise and eletromagnetic elds are generated.

You will also need it placed near at least one grounded power outlet. When cong-

ured, the SC733 chassis includes one power supply.

2-3 Electrical Safety Precautions

Basic electrical safety precautions should be followed to protect yourself from harm

and the SC733 from damage:

Be aware of the locations of the power on/off switch on the chassis as well •

as the room’s emergency power-off switch, disconnection switch or electrical

outlet. If an electrical accident occurs, you can then quickly remove power from

the system.

Do not work alone when working with high-voltage components.•

Power should always be disconnected from the system when removing or in-•

stalling main system components, such as the serverboard, memory modules

and the DVD-ROM (not necessary for hot swappable drives). When discon-

necting power, you should rst power down the system with the operating

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 61 62

Brak uwag

Supermicro CSE-733T-450-B Instrukcja Użytkownika Strona 11