Supermicro SuperServer 8047R-TRF+ Instrukcja Użytkownika Pobierz pdf (Strona 105)

Chapter 7: BIOS

7-19

Data Bits

Use this feature to set the data transmission size for Console Redirection.

The options are 7 Bits and 8 Bits.

Parity

A parity bit can be sent along with regular data bits to detect data transmission

errors. Select Even if the parity bit is set to 0, and the number of 1's in data

bits is even. Select Odd if the parity bit is set to 0, and the number of 1's in

data bits is odd. Select None if you do not want to send a parity bit with your

data bits in transmission. Select Mark to add a mark as a parity bit to be sent

along with the data bits. Select Space to add a Space as a parity bit to be

sent with your data bits. The options are None, Even, Odd, Mark and Space.

Stop Bits

A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for

standard serial data communication. Select 2 Stop Bits if slower devices are

used. The options are 1 and 2.

Flow Control

This feature allows the user to set the ﬂ ow control for Console Redirection

to prevent data loss caused by buffer overﬂ ow. Send a "Stop" signal to stop

sending data when the receiving buffer is full. Send a "Start" signal to start

sending data when the receiving buffer is empty. The options are None and

Hardware RTS/CTS.

VT-UTF8 Combo Key Support

Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100

terminals. The options are Enabled and Disabled.

Recorder Mode

Select Enabled to capture the data displayed on a terminal and send it as

text messages to a remote server. The options are Disabled and Enabled.

Resolution 100x31

Select Enabled for extended-terminal resolution support. The options are

Disabled and Enabled.

Legacy OS Redirection Resolution

Use this feature to select the number of rows and columns used in Console

Redirection for legacy OS support. The options are 80x24 and 80x25.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 121 122

Brak uwag

Supermicro SuperServer 8047R-TRF+ Instrukcja Użytkownika Strona 105